CompreVac is a full stocking distributor of Atlas Copco and Summit lubricants which are engineered with the exact right selection of additives that interact in just the right proportion to obtain optimal performance. The additives not only support the base lubrication requirements, they also interact in multi processes in the compressor.
Atlas Copco Roto-Inject Fluid is specially formulated to protect your GA-GX rotary screw compressors and neutralize pollution. It guarantees the longest lifetime, trouble free, with constant performance, at the best operating cost.
Years of experience on thousands of types of Atlas Copco equipment have proven Roto-Inject Fluid to match all lubrication demands in varied conditions. It boasts an extended service interval of up to 4 000 hours for operation in a mild environment. This is critical to achieve the best reliability and reduce the service lifetime cost.
When your air compressors need to perform at top capacity, only the Atlas Copco lubricant is good enough. That’s why it pays to use Roto Synthetic Fluid Xtend Duty. It is a long life PAO oil, specifically developed for use in Atlas Copco oil injected screw compressors.
Based on synthetic hydrocarbons and special additives, our specially engineered 8 000 h lubricant has proven its ability to meet all lubrication demands under widely varying conditions. RSF Xtend Duty increases compressor reliability, reduces lifetime operating costs and makes your equipment last longer.
Atlas Copco Roto Inject Fluid NDURANCE is a mineral based oil specially formulated to protect your GA-GX rotary screw compressor.
With several years of experience on developing cutting edge technology on compressors, Atlas Copco has designed a unique additive package that enables the Roto Inject Fluid NDURANCE to work in harmony with all other components in the compressor
With several years of experience on developing cutting edge technology on compressors, Atlas Copco has designed a unique additive package that enables the Roto Synthetic Fluid Ultra to work in harmony with all other components in the compressor.
With extended service intervals of up to 4000 hours when operating in demanding conditions, RS Ultra is a combination of a premium synthetic base fluid with an enhanced additive package to allow your compressor to operate in dusty and humid conditions and keeping your system deposit free. This combination (base oil and tailor made additive package) insures compressor protection and improves the energy consumption when comparing with our mineral lubricants
Roto Synthetic Fluid Food Grade is a high performance fluid specifically designed for use in oil injected screw compressors operating in the Food/Beverage, Pharmaceutical and packing industry. National and international regulations specify strict manufacturing standards regarding contamination risk management in this industry.
Our RSF Food grade is based on a careful blend of synthetic fluids and additives that meet these stringent requirements, allowing for active Critical Control Points management (in an HACCP system) and providing increased customer confidence in the food products' safety.
Roto Z Fluid is a high quality lubricant, uniquely tailored to the specific requirements of the Atlas Copco Z-compressors. Its special formulation yields top performance and maximum lifetime of all moving parts. Reliability is safeguarded and equipment availability is maximal.
Roto Z is cost-effective too: drain intervals are doubled in comparison to conventional lubricants.
Roto Z incorporates the functional benefits of a preservative mineral oil, which allows for an extended on-site storage of several months.
Summit SBL synthetic lubricants are formulated to provide maximum lubrication protection and service for all positive displacement blowers including Roots, Gardner-Denver, Sutorbilt and Duroflow.
Advantages over petroleum lubricants include extended lubricant life (up to 8,000 hours with oil analysis), reduced operating temperatures, better corrosion protection, enhanced low and high temperature lubricating properties, longer blower life with reduced wear, and lower maintenance costs.
The SBL synthetic lubricants exceed the specification requirements for all of the major manufacturers of positive displacement blowers and are compatible with most commonly used seal materials.
SUMTECH® FMG grease is an aluminum complex thickened semi-synthetic lubricating grease created specifically for the food service, beverage, and packaging industries. The aluminum complex thickener system provides excellent water resistance and a broad operating temperature range.
A combination of newly developed additives and dependable HX1 additives provide excellent anti-wear/extreme pressure properties, oxidation resistance, and corrosion prevention. Special additives are employed to keep the grease in place between wash-down cycles which improves equipment and lubricant life in wet conditions. SUMTECH® FMG grease is NSF Registered.
SumTech® FGCO grease is a calcium oleate thickened, synthetic lubricating grease created specifically for the food service, beverage, and food processing industries. The unique biofriendly thickener system provides excellent water washout and shear resistance as well as a high drop point.
A combination of newly developed additives gives this grease an extremely high weld point while offering excellent antiwear/extreme pressure properties, oxidation resistance, and corrosion prevention. Special additives are employed to keep the grease in place between washdown cycles which improves equipment and lubricant life in wet conditions.
SumTech® EMB-160 is semi-synthetic ISO 150 polyurea grease specifically designed for use in rolling element anti-friction bearings operating under extreme temperatures. The organic polyurea thickener system contains no metal ions which act as catalysts for oxidation.
SumTech® EMB-160 was designed with special antioxidants and corrosion inhibitors to ensure long life of rolling bearings operating under severe temperature and high humidity. The extended service temperature range of -22ºF to 320ºF and high speed factor of 500,000 nDm makes SumTech® EMB-160 the ideal lubricating grease for electric motor bearings designed to be lubricated for life.
Summit DSL ® synthetic lubricants are unique combinations of quality diester base stocks and the latest additive technology. Summit provides a wide range of DSL® lubricants that cover applications for rotary vane, rotary screw, and all ages and design types of reciprocating compressors.
Summit DSL® lubricants are especially noted for the following benefits:
Summit SH® Series lubricants are manufactured from the highest quality PAO (polyalphaolefin) base stocks and advanced additive technology. SH® Series lubricants are recommended for rotary screw, centrifugal, and reciprocating compressors and offer many advantages over petroleum-based lubricants as well as some synthetics - especially where compatibility is an important concern.
The SH® Series lubricants have low pour points, high viscosity indices and excellent water demulsibility.
Summit Supra-32 has been formulated to address the specific problems associated with conventional rotary screw compressor coolants - thermal degradation and deposit formation. The polyglycol/ester blend has provided superior performance in the areas of oxidation resistance and deposit formation.
Supra-32 eliminates the varnish, sludge and the frequent lubricant changes associated with petroleum oils.
Summit Supra Coolant® has been formulated to address the specific problems associated with conventional rotary screw compressor coolants - thermal degradation and deposit formation. The polyglycol/ester blend has proven itself superior in the areas of oxidation resistance and deposit formation.
Supra Coolant® is the alternative to varnish, sludge and the frequent lubricant changes associated with hydrocarbon oils.
Summit Ultima® is a high performance lubricant formulated specifically to outperform other synthetic rotary compressor lubricants on the market. Ultima employs a unique base stock that allows improvements in oxidation resistance and sludge and deposit formation over conventional synthetic base stocks.
It is also compatible with existing O.E.M. provided lubricants. Please contact CompreVac Inc for additional information.
Summit PS Series premium synthetic blend lubricants are a blend of synthetic and petroleum base fluids specially designed for compressor applications and are useful in multi-purpose applications. The lighter grades are also well suited for gas and steam turbine applications.
The PS Series is manufactured using the highest quality base stocks, additive treated with rust and corrosion inhibitors, oxidation control agents, anti-wear compounds and defoamants and is exceptional at controlling sludge and deposits. Please contact CompreVac Inc for specific product recommendations.
Summit Sierra® is specifically designed to provide extended service to rotary screw air compressors operating within normal conditions. Summit Sierra® is rated to provide superior service for 8,000 hours in most air compressor applications.
Produced from the highest grade additives and base stocks available, Summit Sierra® Series will continue to protect air compressors from wear and deposit formation where other compressor lubricants fail. Based on lubrication technology with millions of hours of proven performance, Summit Sierra® is supported by the Summit performance guarantee. Utilizing the free in-house lubrication analysis provided by Summit, professional lab technicians can track the performance of the lubricant and will determine when the lubricant needs to be changed.
Summit Sierra® is compatible with most rotary screw air
compressor lubricants on the market. It is not compatible with silicone or polyglycol based air compressor lubricants.
